Menzerna Super Finish ( SF 3500 ) 32oz
Rs. 2999.0000 Out Of Stock
Check COD Pincode


Menzerna Super Finish ( SF 3500 ) 32oz

Brand: MENZERNA

Product Code: SF-3500

Availability: Out Of Stock


Price: Rs.2,999



Menzerna Super Finish SF-3500 is the new and improved version of Super Finish SF-4000

Menzerna Super Finish PO 106 FA is another polish developed by Menzerna of Germany to address defects on ceramic clear coats at auto plants. With subtle adjustments to the PO 106 FF formula, Menzerna has made a phenomenal polish even better. It cuts fast with very little dust and leaves a mirror shine.

Though Super Finish SF-3500 is designed for ceramic paint, the small abrasives work well on conventional clear coats without introducing holograms.

Menzerna Super Finish SF-3500 removes 2500 grit sanding scratches, holograms, compounding haze, light swirls, and mild oxidation. It can be used on brand new finishes or on older, reconditioned paint.

Menzerna Super Finish SF-3500 contains no silicone, waxes, glazes, or fillers. This is a water-based product. One upgrade of this product is that SF-3500 produces very little dust, even less than the original Super Finish PO 106 FF.

Application by hand:
Mist the Chemical Guys Polish N Wax Applicator with Chemical Guys Pad Conditioner to moisten the foam. Apply a small size amount of Menzerna Super Finish to the applicator.
Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.

Application by Machine:
Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Super Finish out of direct sunlight.
Use a soft foam finishing pad, Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
Polish at 1200-1800 RPM (5-6 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
Wipe the area with a damp microfiber cloth.
Always apply a wax or sealant after polishing. We recommend Chemical Guys Jet Seal Paint Sealant to seal in the shine with its long-lasting Synthetic formula.

Note: Applying Menzerna Super Finish by hand will enhance gloss but it will not remove swirls. For paint correction, you must apply this product with a polisher.

Details
Key Features 1.Swirl remover for a perfect mirror finish 2.Brilliant deep gloss 3.Processing: Rotary, Dual action, by hand 4.Cut / Gloss: 3 / 10
Brand Menzerna

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Related Products

News Letter