Menzerna Final Finish (FF-3000) 32oz
Rs. 1659.0000 Out Of Stock
Check COD Pincode

Menzerna Final Finish (FF-3000) 32oz


Product Code: FF-3000

Availability: Out Of Stock

Price: Rs.1,659

The perfect one-step polish to enhance new and like new paint finishes!

Menzerna Final Finish is a pure polish with no glaze, fillers, or silicones. The water-based formula contains no solvent. It is safe on fresh OEM coatings and new repair coatings. Menzerna Final Finish will not create new swirls or leave haze, and it creates no dust. It leaves only a high gloss finish on all colors and types of paint, with or without a clear coat.

Use Menzerna Final Finish on brand new paint finishes or on vehicles in like-new condition. This is an excellent gloss-enhancing finishing polish to remove old wax, deepen the gloss, and remove minor swirls and imperfections prior to wax application. Final Finish can also be used after a stronger polish to remove haze and restore surface gloss.

This is called Final Finish but its an ideal first polish for newer vehicles that only have very fine swirls. The abrasives are extremely finely milled to prevent the creation of new swirls. Even on black paint, Menzerna Final Finish will produce an outstanding shine without a trace of micro marring.

Application by hand:

  1. .Apply a small size amount of Menzerna Final Finish to the applicator.
  2. Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.

    Application by Machine:
  3. Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Final Finish out of direct sunlight.
  4. Use a soft foam polishing pad. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
  5. Polish at 1200-1500 RPM (4500-5000 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the swirls have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
  6. Wipe the area with a damp Microfiber Towel.
  7. Always apply a wax or sealant after polishing.
Key Features 1.Removes 2500 grit sanding scratches 2.Water based, non silicon 3.Safe on all types of paint 4.produces a mirror like gloss 5.use after menzerna intensive polish to restore optimun gloss on dark paints

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

News Letter