Aquartz T CERA Titanium Ceramic Coating kit For Paint & Windshield
Rs. 3190.0000 Out Of Stock
Check COD Pincode

Aquartz T CERA Titanium Ceramic Coating kit For Paint & Windshield


Product Code: AQ_4058

Availability: Out Of Stock

Price: Rs.3,190

The world's finest automotive inorganic Titanium Coating on paints & windsheild glass.

Kit Includes:

  • Aquartz T-CERA Titanium 40ml
  • Aquartz Suede Microfiber 1pc
  • Aquartz Applicator Sponge 1pc
  • Microfiber Cloth 1pc

T-CERA nano Particles increase the hardness of the surface and makes the surface resistant to scratches. The surface becomes hydrophillic.
This Nano titanium treatment is a protective film composed of liquid Quartz-Titanium and Silicon. Nano Titanium ensures that you keep the quality of your paint like new for a very long time.

  • 2cd6de896e7c42.jpg.999xx.jpg
Application of T-Cera

1.Shake well, pour few drops on cotton pad or on the applicator wrapped with the suede microfiber towel.

newpicture1.png newpicture.png newpicture2.png

2.Apply T-Cera in straight lines, criss-cross way on each car panel.


3.Let it be for 10-15 minutes and then wipe off gently with soft towel or a microfiber cloth (Not damp towel) until no marks left, finish by wiping in a circle motion well. To get the best results, you should rub the surface over and over after applying!! By the frictional heat and static electricity, the more you buff, the more the bonding, high gloss & quick drying are achieved by over- rubbing.- It makes the Nano Titanium to infiltrate into the pores of the paint.4. Let dry it up, it takes 20min to cure at 25C.

  • At below 15C or cloudy weather, you should use a heat gun, IR heater lights or sun lights to get short curing.
  • The more it cures better water repellent it shows.
  • Completely cure wits- NO rain takes 24h at 25C.
  • Do not drive the car during this time
Note:a)Donot let the product to sit on the surface, otherwise hard to remove may be via compounding
b) Do not apply directly on paint.
c) Process should not be done in direct sunlight.
Windshields Coating -
T-Ceracan be applied also to the front windshield, giving rain & dirt repellent, self-cleaning, smoothing / sliding effect.
Follow the same process as the application on car paint surface.
1. Clean the windshield thoroughly & dry the car.
2. After T-Cera coated on windshields, coat on wiper blades, it will make the wipers smooth operate giving you a clear view.
To care for and maintain your T-Cera coating it should be washed by hand using a soft microfiber towel or Wash Mitt,
or use a high-pressure water-jet.
If required, you can recoat Dry-Coat ( T-Cera, T-Fusion) after drying the surface.
After car wash, coat AQuartz Wet-Coat (Titanium V2, V3, ReLoad Pre) on the surface periodically.
In order to get long lasting, on re-coating intervals of about three days, the duration should be more than 3~4 years.
Brand Aquartz

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Related Products

News Letter