Aquartz Iron Cut Remover & Cleaner 1ltr
Rs. 2980.0000 Out Of Stock
Check COD Pincode


Aquartz Iron Cut Remover & Cleaner 1ltr

Brand: AQUARTZ COATINGS

Product Code: AICRC1

Availability: Out Of Stock


Price: Rs.2,980



AQuartz Iron-Cut Remover for Car Paint and Wheels

Highly effective, acid-free and pH balanced ( 7.5 1 pH) car paint, glass and wheels cleaner (safe for all wheels including aluminum and alloys).

This formulation is also effective and safe for use on all car surfaces and will not deteriorate clear coats.

Other Iron remove product can be used directly on the car body, however it also removed clear coat and all the shiny surface fade away, but Iron Cut is not.

Please try to test on the shiny surface!!

Iron-Cut is the most essential step before any polishing work done on the car which no other cleaner can do.

Iron-Cut is very important to use before AQuartz application.

This preventative measure puts a stop to corrosion, Iron-Cut contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex.

No other method cleans paint and wheels as deeply as Iron Cut.

The Iron-Cut Paint and wheels Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying !!.

If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint.

AQuartz Iron Cut has a water-repellent effect, after rinsing Iron Cut, the remaining water-repellent effect helps in avoiding the formation of rust on the surface of brake rotors and body surface.

The Iron-Cut is designed to remove what lies below the paint surface.

Airborne chemical compounds and ferrous

particles - particles containing iron - actually penetrate the paint and create corrosive

compounds that eat deep into the paint's sub-layers or paint's pin-

image0021.jpg

This is a gradual process that often is not evident until it's too late.

Claying or polishing only removes the particle, not its effects, which are continuing to spread beneath the surface.

During the use of your vehicle, brake dust and road grime become sintered to the surface of the car paint, rims and wheels due to the high temperature conditions they are normally exposed.

Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals.

Iron-Cut opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface.

Ongoing damage is immediately stopped and future damage is prevented by removing the ferrous particles.

Iron-Cut sprays on as a bluish transparent, as the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple.

The purple/red coloration is the Iron-Cut Remover forming a bond to the sintered iron on the car paint and wheel and changing its state to a water soluble complex for easy removal. Stubborn, baked on grime may take a small amount of agitation.

Especially, as AQuartz Iron Cut has water-repellent effec, after rinsing Iron Cut, the remaining water-repellent effect helps in avoiding the formation of rust on the surface of brake rotors and body surface.

The Iron-Cut is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep.

It is proven to deliver a clean, glassy smooth vehicle that is protected from the harmful effects of paint contamination.

No other is as fast and effective at removing multi-layer paint and wheels contamination.

How to use

1. Wash the car paint or wheels surfaces, make sure surface is cool.

2. Shake well, spray on the surface, rub it in with a paint brush or damp sponge thoroughly, wait 3 mins while contaminants change its color to purpel, wipe off with a paint brush or damp soft sponge.

3. Do not let the Iron Cut dry completely on surface.

4. Rinse well or power wash the whole surface.

* Average consumption per complete car: 100 ~ 150ml.

* Shelf life: 2 year if kept closed in cool, dry place.

* Iron Cut is the most essential step before any polishing work done on the car which no other cleaner can do.

* Iron Cut is very important to use before Aquartz application.

 

Details
Brand Aquartz

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Related Products

News Letter