Rupes Yellow Polishing Foam Pad 7" 180mm
Rs. 996.0000 In Stock
Check COD Pincode


Rupes Yellow Polishing Foam Pad 7" 180mm

Brand: RUPES

Product Code: 9.BF180M

Availability: In Stock


Price: Rs.996



Rupes - Yellow Polishing Foam Pad

  • Beveled Pads of 7" face with 180mm velcro backing (BF180M) for BigFoot 21

World-class car polishers arent the only thing Rupes specializes in!

Car polishers manufactured by Rupes require a special foam pad design as a result of their massive throw. The throw of the machine indicates the size of the orbit the pad makes. Regular foam pads can cause the machine to feel imbalanced while the pad itself will experience excessive wear. Rupes designed their foam pads to work harmoniously with the Big Foot Polishers because a fine Italian sports car is only as good as the tires attached to it!

Rupes foam pads are constructed of super durable open-cell foam that is designed to withstand extended polishing sessions without losing mechanical cutting or polishing abilities. The 24 degree beveled edge ensures 100% surface contact so you get better results every time.

Your polisher, compounds and polishes are only as good as the pads youre using them with. This is especially true with the Rupes Big Foot Polishers because of the enormous stroke each tool makes. Rupes spent a considerable amount of time developing a line of foam pads that would not only work with the massive stroke of the Big Foot Polishers, but actually take advantage of it to deliver better results.

Rupes foam pads are available in 100 mm (4 inch), 150 mm (6 inch) and 180 mm (7 inch) in the following configurations:

Yellow Polishing Foam Pad

This pad is the third step in the Rupes Big Foot Polishing System. The Yellow Polishing Foam Pad was designed to be used with Rupes Keramik Gloss Fine Gel Polish to remove light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.

Rupes foam pads need to be properly cared for to ensure maximum operating life. Clean your pad often with a Foam Pad Conditioning Brush to remove spent polish, oxidized paint and other embedded contaminants that were removed from the paint during the polishing process. When youre finished using the pads for the day, soak them in a bucket of warm water and mix in 50-75ml of Multi Purpose cleaner. It removes caked on polish and wax residue, leaving your pads clean and ready for future polishing sessions. After theyve soaked for 15 to 20 minutes, thoroughly rinse them out and allow them to air dry in a well ventilated area with the backing material facing up.

  • Rupes 180 mm (7 inch) Foam Pads are designed to be used with a 6 inch hook and loop backing plate.

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

News Letter